Power outages are common in India. Things have become difficult as a result of our reliance on electricity for almost everything. Summers exacerbate the situation. It is recommended to use an inverter to eliminate these frequent power outages. One of the most common appliances is an inverter. It is a necessary device found not only in factories but also in homes, schools, offices, and public buildings. In the event of a power outage, this appliance can save the day.
Visit: 10.0.0.1 piso
Inverters, like any other appliance, are prone to malfunction. People frequently experience issues with inverters. Fortunately, some of these issues can be resolved without the assistance of a professional. Before buying an inverter, consult with the best Automation companies in Dubai to know everything about inverters and to know the best suitable one for you. Let’s go over some common inverter problems.
REFUSE TO TURN ON
Some of the causes of an inverter not turning on include:
- When an inverter trips.
- When a battery is removed from an inverter.
- If the inverter’s battery is depleted.
- When the inverter battery is depleted.
- A battery with faulty terminals.
- If the battery terminals are reversed, attach.
- When an inverter is connected to an erroneous switch.
There are numerous approaches to resolving these various issues. By pressing the reset button, you can resolve the tripped inverter issue. If a power switch is causing problems, repair it. Change the battery if it is faulty or defective. Allow an inverter’s battery to charge for several hours if it has a weak battery.
If your battery terminals are causing problems, check for corrosion, clean the rust, and tighten the clamps.
ALARM BLARING CONTINUOUSLY
This occurs when an inverter is subjected to excessive load. The solution to this problem is to unplug all devices that place an additional load on the inverter. Another cause for the alarm is a problem with the cooling fan. While an inverter is operating, this fan keeps the inside of it cool. If the fan is not working properly, the inverter will either blow an alarm or shut down. It indicates that an inverter unit is not operating properly. So, clean up the fan and get it working again.
NOISE FROM THE INVERTER
Inverters typically produce noise. However, it increases when the fan collects a lot of dust and debris. Clean the fan to resolve this issue. If the noise continues, replace the fan.
The LCD displays incorrect codes:
The LCD of an inverter frequently does not display the correct numbers. It may occur as a result of:
- External Concerns
- Internal Issues
Internal issues can be linked to circuits. As a result, a professional would be needed to solve them.
External issues can be resolved by:
Examine the Battery Cables
Examine the Input and Output Wires
Check the load again.
VERY LIMITED BACKUP CAPABILITY
One of the most serious issues with inverters is their extremely short backup time. The following are some possible explanations:
- Excessive power consumption.
- Incorrectly charging the battery
- Electrolyte deficiency
These three issues can be resolved by removing extra loads, charging a battery for a few hours, and refilling a battery with water, in that order.
BATTERY DOES NOT CHARGE
This problem could be caused by:
Rectifiers burned by a dead battery
Fuses that have melted
Replace the battery and clean the terminals to remove any corrosion.
These are some inverter problems and their solutions. To make your life easier, invest in a good inverter. Contact with the best inverter repair services for any queries.